Now I drilled holes in the floor and sub-floor to add more magnets (one in each location) and glued the floor in place. I CA'ed more brass wire to act as track.
I've added the interior walls. This shot shows the platform in it's rear position. The second is taken from behind, and shows it in the front position.
In these shots, I've mocked-up a gun mount to give you an idea of how the gun will function. The actual mount will have a greater range of motion. The base of the mount (the tip of an automobile DC power adapter) has the same big magnet as the platform. Very strong bond.
Notice where the front opening cover is stored during combat.
We'll be right back with Part 6 after these commercial messages. Don